We offer a professional quality service with a significant saving compared to the manufacturer.
The Spindle accuracy will be guaranteed to be within the machines specification.
DMTS have carried out numerous Spindle
re-builds on the following:
Matsuura – MAM 72, HPLUS, VPLUS, 900H,
FX, 20K and 15K.
Niigata – 50 and 63
Mori Seiki – SH, MH, NH and MV
SNK – HPS 120 and RB
Once diagnosed, your Spindle will be disassembled from the machine. Upon arrival to our facility the Spindle will be entered into the quality control system. The Spindle will then be stripped down and all components inspected. All worn components will be replaced or manufactured as necessary to bring them back to original specification. The Spindle will then enter the temperature controlled clean room where assembly will take place with Super Precision Bearings. The Spindle accuracy will be guaranteed to be within the machines specification.
The axis is disassembled.
We then transport it to our workshop where the old turcite is removed.
New turcite is fixed.
The turcite is then ground and new oilways milled in. Hand scraping is carried out to achieve the best accurracy.
DMTS will try and maintain the accuracy produced by the machine builder for example under 10 microns in 300mm on all axis reground, this is subject to condition and wear in the base of the machine.
DMTS has produced this on all of our refurbishments.
Electrical and Mechanical breakdowns on machines covering the UK.
Drive and Motors can be repaired locally.
Service exchanges are available.
Ballscrews can be re-furbished.
Switch gear is sourced locally.
Electronic and Mechanical Repairs.
5 axis Re-Alignments after impacts.
4th and 5th Axis Rebuilds.
Ball bar Checks.
Ball Screw Refurbishment.
Spin window repairs.
Slide way Cover Repairs and Replacement.
Dolby Machine Tool Solutions Source most of its spare parts within the U.K and Japan.
We offer a wide variety of parts at a greatly reduced cost compared to the manufacturer. Below are just some of the many parts we supply.
Slide way Covers and Repairs
Spin Windows and Seals
We have re-located several factories to new sites. Including 5 x Matsuura MAM 72 35V machines at a cycle parts company.
And have also re-located 35 machines for an Aerospace company to their new facility.
Dolby Machine Tool Solutions Ltd
16 Dunbar Way
DMTS have over 20 years experience in the Machine Tool Industry. DMTS are based in Leicestershire and our Service Engineers cover the whole of the UK.
DMTS offer a fast, friendly and professional response to our customers, be it an Electronic or Mechanical fault our Engineers will provide a quality service to get your machine back into production.
Our Customers are in a range of Engineering sectors including Aerospace, Precision Engineering Sub Contractors, Motor Sport, Medical, Oil and Gas. DMTS provide support and spare parts to a wide variety of CNC Machines including Vertical and Horizontal Machining Centres, CNC and Conventional Lathes.
DMTS aim to provide next day service where possible on your machinery. In some cases faults can be solved by a simple phone call. DMTS are also independent Matsuura, Mori Seiki and SNK specialists. OKK, Doosan, Daewoo, Makino, Niigata, Harrison, Victor, Fanuc, Siemens and Yaskawa are just some of the many products worked on.