DMG NLX 2500 / 700 SYM [2019]

M730UM CELOS With MAPPS V Operating System.
CELOS ERGOline Touch operation panel with 21.5-inch multi-touch screen
2 Keys

Swing over Bed mm(in.)
920 (36.22) <interfere with front cover: 620 (24.41)>

Swing over Cross Slide mm (in.)
740 (29.13)

Maximum Distance Between Spindle Nose Surfaces mm (in.)
961 (37.83)

Max. Turning Diameter mm (in.)
366 (14.41)°4, 356 (14.02)"5 [406 (15.98) <12st VDI high-precision quick-change turret (DIN)>] [348 (13.7) <16st turret head>] [278 (10.95) <20st turret head>]

Standard Turning Diameter mm (in.)
271 (10.67)"4 275 (10.83)5[330 (12.99), 335 (1319) <10st turret head>] [260 (10.24) <12st VDI high-precisionquick-change turret (DIN)>] [206 (8.11) <16st turret head>] [192 (7.56) <20st turret head>]

Max. Turning Length mm (in.)
705 (27.76)

Bar Work Capacity mm (in.)
80 (3.15) [90 (3.54) <continuous through spindle hole diameter 91 (3.58)>] [102 (4.02) <continuous through spindle hole diameter 103 (4.06)>]

X-Axis Travel mm (in.)
260 (10 24)

Y-Axis Travel mm (in.)
‡50 (‡1.97)

Z-Axis Travel mm (in.)
795 (31.30)

Spindle 2B-Axis Travel mm (in.)
734 (28.90)

HAINBUCH SPANNTOP mini SK80BZIG Clamping Head
Mini Pull Back - Size 80 (A8 Spindle)
Hydraulic Controlled Collet Chuck
Clamping Range
4 - 80 mm
ø Capacity
82 mm
Outer Diameter Length
204 mm

Max. Spindle Speed min-1
4000 <through spindle hole diameter 111 mm (4.37 in.)>]

Number of Spindle Speed Ranges Step
2 <winding changeover>

Spindle Nose Type
JIS A2-8

Through Spindle Hole Diameter mm (in.)
91 (3.58) [111 (4.37)]

Spindle Bearing Inner Diameter mm (in.)
140 (5.51) [160 (6.30) <through spindle hole diameter 111 (4.37)>]

Minimum Spindle Indexing Angle °
0.001

Kitagawa 6 inch Hollow Chuck B206A521F
3 Jaw Hydraulic Chuck
Through Hole Diameter 45mm

Max. Spindle Speed min-1
6000 [5000 <through spindle hole diameter 73 mm (2.87 in.)>]

Number of Spindle Speed Ranges Step
1

Spindle Nose Type
JIS A2-5 [JIS A2-6 <through spindle hole diameter 73 mm (2.87 in.)>]

Through Spindle Hole Diameter mm (in.)
43 (1.69) [73 (2.87)]

Spindle Bearing Inner Diameter mm (in.)
85 (3.35) [120 (4.72) <through spindle hole diameter 73 (2.87)>]

Chuck
6" solid & hollow [8" hollow <through spindle hole diameter 73 mm (2.87 in.)>]

Minimum Spindle Indexing Angle °
0.001

Turret Type
Rotary Tool Spindle for the 20 Station in-house bolt tightened turret,
BMT (Built-in Motor Turret)
Rotary Tool Machining ability:
Rotary Tool Spindle, 10,000rpm
Drill 20mm Diameter, Tap M16

Number of Tools on Turret
20 Tools

Shank Height for Square Tool mm (in.)
25 (1) [20 (3/4) <12st VI high-precision quick-change turret (DIN), 16st turret head, 20st turret head>]

Shank Diameter for Boring Bar"3 mm (in.)
50 (2) <subspindle side 32 (1-1/4)> [32 (1-1/ 4)1*3 [40 (1.57) <12st VDI high-precision quick-change turret (DIN)>] [25 (1) <16st turret head>] [32 (1-1/4) <20st turret head>]

Rapid Traverse Rate mm/min (ipm)
X. Z. B: 30000 (1181.10)
Y: 10000 (393.70)

Jog Feedrate mm/min (ipm)
×z.Y.B:0-5000 (196.85)

Spindle 1 Drive Motor (25% ED/ 50%ED /Cont.) kW (HP)
18.5/18.5/15 (24.7/24.7/20) (26/26/22 (34.7/34.7/30) (10 min/30 min/cont <high output> [(22/18.5 (30/24.7) (30 min/cont.) <Through Spindle hole diameter 111 mm (4.37 in.)>]

Spindle 2 Drive Motor (25% ED/Cont.) kW (HP)
11/7.5 (15/10)

Rotary Tool 1 Spindle Drive Motor (3min / 5 min /Cont. kW (HP)
5.5/4.9/4.2 (7.5/6.5/5.6) (25%ED/30%ED,cont.) <12st bolt-tightened turret [5.5/5.5/3.7 (7.5/7.5/5) (3 min/5 min/cont.) <10st bolt-tightened turret, 16st VDI quick-change turret, 20st bolt-tightened turret>] [10.7/8.5/6.1 (14.3/11.3/8.1) (15%ED/30%EDcont.) <12st VI high-precision quick-change turret (DIN)>]

Feed Motors kW (HP)
X. Y. Z: 3.0 (4.0), B: 2.0 (2.7)

Hydraulic Pump Motor kW (HP)
2.2 (3)

Lubricating Pump Motor kW (HP)
0.02 (0.027)

Coolant Pump Motor kW (HP)
0.55 (0.73)0.35 (0.46)

Cooling Oil Pump Motor kW (HP)
1.43 (1.9)

Compressed Air Supply MPa (psi). L/min (gpm)
0.5 (72.5). 150 (39.6) <ANR>

Hydraulic Oil Tank Capacity L (gal.)
10 (2.64)

Lubricating Oil Tank Capacity L (gal.)
4.2 (1.1)

Coolant Tank Capacity L (gal.)
366 (96.62)

Oil Chiller Tank Capacity L (gal.)
10 (2.64)

High-Pressure Coolant System (800/1, 100 W)
Max. pump pressure: 0.8 MPa (116 psi)
Chip Conveyor (Right Discharge, Hinge Type)

Manual in Machine Tool Presetter (Pivoting Type)
Signal Light
Work Piece Unloader
Bar Feed Interface
Mist Collector interface
Swarf Bin

Control Options Included
DXF Import Function
Islands
Open Pocket
High-Speed Canned Cycle
Block Skip

Tooling in the Turret and on the Pallet is included, (Please note no cutting tools are included)
9 x Hainbuch SK80BZIG Collets (ø 16mm - ø 80mm)

2 x MNZ0122000 Radial reversible double-side twin tool
6 x MZN0143200 6 x Single boring bar holder 32mm Diameter
2 x MNZ0144000 Single boring bar holder 40mm Diameter
1 x MNZ0030120 Radial driven tool 4 Outputs ER20, ratio 1:1, External Coolant
2 x MNZ0172500 3+3 position boring bar holder 25mm
1 x MNZ0192000 Double axial static tool 20x40mm
1 x MNZ 0040220 Axial driven tool 4+4 Outputs - ER20
3 x MNZ0470132 Axial Driven Tool #=85mm Output: ER32, 12000rpm
1 x MNZ0530132L Radial Blade Holder

Plus, Additional Radial Static Toolers
1 x 25mm Double Boring Bar Holder
2 x 32mm Boring Bar Holder
3 x 40x20mm Static Tool Holder
1 x 20x20mm Static Tool Holder
2 x Twin 40 x 20mm Static Tool Holders

(Tooling Package worth over £21,000)

Additional Extras
Reduction Bushes
Manual Changing Tool for SK80 Collets
Tooling Plugs
Spindle Liners
Jaws for Sub Spindle
Tool Box
Midaset Marposs Tool presetter
Transit Brackets
Unused Floor Mounting Kit (For machine and optional Barfeed)
User Manuals